Moto Guzzi Stelvio Bikes Design, Characterstics, Tchnical Data ,And Accessories ~ auto modification motor bike vehicle

Moto Guzzi Stelvio Technical Data
Engine
Type	Four-stroke V 90 twin
Cooling	Air and oil cooled with independent cooling pump
Capacity	1,151cc
Bore and stroke	95 x 81.2 mm
Compression ratio	11 : 1
Timing diagram	Intake valve opening 36° before upper TDC.
(play 1 mm)	Intake valve closing 62° after lower TDC.
Maximum power output	Over 80.8 kW (110 CV) at 7,500 rpm
Max Torque	Over 108 Nm at 6,400 rpm
Fuel supply/ignition	Multipoint sequential electronic injection, Magneti Marelli IAW 5A phased, alfa-n system; 2 x Ø50 mm throttle bodies with Weber IWP 189 injectors, Lambda probe.
Starter	Electric
Spark plugs	NGK PMR8B (Long Life)
Exhaust system	Stainless steel two-into-one 3-way catalyzed with Lambda probe.
Homologation	Euro 3
Transmission
Gearbox	6 speed
Gear ratios	1st 17/38 = 1 : 2.235
	2nd 20/34 = 1 : 1.700
	3rd 23/31 = 1 : 1.348
	4th 26/29 = 1 : 1.115
	5th 31/30 = 1 : 0.968
	6th 29/25 = 1 : 0.862
Lubrication	Oil bath
Primary drive	Helicoidal gears, ratio 27/34 = 1 : 1.259
Final drive	C.A.R.C. reactive drive; double universal joint with floating bevel gear, ratio 12/44 = 1 : 3,666
Clutch	Single plate with integrated flexible couplings
Frame
Frame	High tensile steel tubular twin cradle
Wheelbase	1.550 mm
Rake	125 mm
Steering rake	27°
Steering angle.	34°
Front suspension	Upside down Ø 50 mm fully adjustable forks (spring preload and hydraulic for rebound and compression) with mounting for radial calipers.
Front wheel travel	170 mm
Rear suspension	Progressive single swingarm, fully adjustable monoshock with separate gas reservoir (spring preload and hydraulic for rebound and compression).
Rear wheel travel	155 mm
Front brakes	Twin floating 320 mm stainless steel wave discs, radial calipers with 4 opposed pistons.
Rear brakes	Single 282 mm fixed stainless steel disc, floating caliper with 2 parallel pistons.
Wheels	Spoked aluminum alloy (tubeless)
Front wheel	2.50" x 19"
Rear wheel	5.50” x 17”
Front tire	110/90 ZR19”
Rear tire	180/55 ZR17”
Electrics
Voltage	12 V
Battery	12 V – 18 Ah
Alternator	12 V – 550 W
Dimensions
Length	2250 mm
Width	1025 mm
Height	1475 mm
Saddle height	840 mm
Minimum road clearance	210 mm
Dry weight	214 kg
Fuel tank capacity	18 liters
Reserve	3.3 liters

Moto Guzzi Stelvio Bikes

Main Design Characteristics

Double high-/low-beam headlight assembly with convex surface lenses.
Half-fairing with integrated air deflectors and turn indicators.
Front mudguard with spoiler and integrated fork stems protection.
Manually adjustable windshield.
Blow-moulding process tank with integrated protective superstructure.
Rider saddle adjustable to two positions with skidproof upholstery integrated to the tank.
Passenger saddle with adapted seating and skidproof upholstery.
Glove-box with unlocking control on the handlebar.
Aerodynamic under-sump protection lug.
Engine side bulkheads with metal grid
Luggage supporting frame integrated, with passenger grab handles unit and luggage carrier.
Tubular footrest supports.
Full black “Quattrovalvole” powertrain.
Aluminum hexagonally cross-sectioned silencer with Moto Guzzi customized double bottom.

Engine

“Quattrovalvole”, 90° V-twin, 1200
Single overhead camshaft timing system.
Single plate clutch.
New exhaust system with double superimposed helical outlet.
New crankcase with incorporated front bearing support with bushing.
New valves with Ø 5-mm stem.
New 55% rigid crankshaft.
New Asso 3-ring forged pistons.
New conical valve springs.
Head with independent oil cooling circuit.
Oil cooling jets to piston.
New cooling oil pump with pressure-relief valve.
New lubrication oil pump coaxial with the cooling pump.
Three gears for oil pump and timing shaft control.
New type of connecting rod bushings.
Silent Morse type chains for camshaft control.
Hydraulic chain tensioners and tensioning pads.
New Ø 50-mm throttle body.
New IWP 189 Marelli type injectors
Floating head covers to cushion noise.
Transmission with compact reactive cardan shaft drive.
6-gear gearbox.
Euro 3
New high performance exhaust system.

Chassis

Double cradle frame of high-resistant steel with 6 points for engine connection.
Upside-down front fork with 50-mm stems, adjustable preloading and hydraulic damping with radially-mounted caliper.
Shock absorber with preloading and rebound adjustment.
Rear suspension with progressive articulation single arm.
Front brakes, radially mounted with 4 opposed pistons and 320-mm discs.
Rear 282-mm disc brake, floating caliper with two parallel pistons.
Tubeless spoke wheels with aluminium Ber rim and Alpina spokes.
Rear tyre 180/55/17 Pirelli Scorpion.
Front tyre 110/80/19 Pirelli Scorpion.

Accessories
With company, on long motorway stretches, in winter or on the mountains, in streets or off-road, there is always the right solution to have enhanced safety, greater load capacity or an additional elegant touch.

Engine guard kit - The engine guard is made in treated and painted steel to ensure an effective engine protection in case of fall at low speeds. Moreover, it is prepared to fit an optional additional light support and an aluminum sump guard.

Aluminum sump guard kit - The aluminum sump guard is made of a 3 mm thick high resistance alloy that ensures an efficient protection against strokes or grit raised by the front wheel. It also ensures an optimal cooling of the engine. It can be mounted even if the engine guard is fitted.

CA.R.C Protection kit - The protection for the CA.R.C (Italian for compact reactive cardan shaft drive) is made in treated and painted steel t protect the transmission from potential accidental bumps.

Side panniers - Moto Guzzi Stelvio set of panniers is characterized by the bodywork paintwork and its 60-litre volume. The pair of cases has been made with extreme care of practicality and finishings. The system to fasten them to the motorcycle has been designed to be perfectly integrated to the motorcycle line, thanks to the dedicated pannier supports integrated into the tail, and its passkey makes it practical and functional.

Tank pannier kit - The tank bag kit comprises a special tank cover with clamps to the chassis and a tank bag appropriately molded. The bag can be easily removed or lifted to refill the tank, thanks to a fast-release lock, and it has a map holder and two side pockets. A practical bum-bag purchased separately can be fitted on the tank cover instead of the pannier.

Tank bum-bag - Practical bum-bag to be hooked on the tank cover supplied with the tank bag. It allows the rider to keep small objects as an alternative to the bag.

Navigator installation kit - The specific support to install the TomTom Rider 2 navigator is made in fully milled aluminum and is supplied with specific screws. The motorcycle electrical system is already pre-installed with a special power supply connector.

Electronic anti-theft device - It is supplied with double engine lock and 3-axis inertial sensor, with double variable code
radio control, fully resinated and self-powered. The pre-installation makes the fitting on the special support easy and quick.

Additional light kit - Thanks to the wide and powerful light beams (110W), the wildest paths can be faced with the best visibility. They are made in magnesium alloys and they are ready to be fitted thanks to the electrical system pre-installation. They are fixed to the specific supports made in powder-coat painted steel. They are approved for road use.

Handgrip heating kit - Cold weather is not going to prevent owners from wanting to ride the STELVIO 1200 4V. The handgrip heating kit allows to choose between 3 different levels of temperature by simply pressing a button. Information about the on/off condition and selected temperature are shown on the display.

Stelvio Jacket and Trousers - For those who not only ride, but also live the Stelvio, clothing is available to ensure maximum comfort and protection in all riding situations. Made from Cordura in collaboration with Dainese. D-Dry waterproof lining and removable thermo-lining. Composite pads for shoulders, elbows, knees and shinbones, ice leather inserts, pre-installation for back protector. Adjustable neck, waistline and wrists, metal Moto Guzzi logo and stitching on the back and thigh. Available in models for men and women, sizes from 40 to 58.

Moto Guzzi Stelvio Bikes